Luminescent Paint Mixing Instructions

2018-06-26 20:40:00
admin
Original
203

Glow paint consists of glow powder mixed with clear organic resin, organic solvents and in some cases other materials. Once mixed, it can absorb light and glow in the dark for hours.

Mixing Instructions for Luminous Paints

a.Choose transparent, neutral or weak acid organic resins like polyurethane resin, acrylic acid resin, epoxy resin, polyester resin, etc.. 

b.For painting purposes, particle size of pigments can be between 50-90um or 20~50 um is recommended. 

c.Mix about 20 to 50% of luminous pigment, measured by weight, to the clear resin. This is just a guideline. You could add more or less according to your requirements 

d.Mixing ration for UV light sensitive powders is only 15 to 25%, measured by weight, to the clear resin. 

e.Do not grind the luminous pigment. 

f.Use containers with ceramic or glass interiors and stir the mixture at high speed. 

g.To avoid deposits, you should use high viscosity resins or anti-settling agents. Stir well prior to application, process small batches at a time.  

h.Do not use heavy metal components as additives.  

i.The more powder or higher the percentage, the brighter and longer the glow will last.  

j.Add Medium to powder, not powder to medium. That way you can stop when desired glow effect is reached. 

k.Use a white or light color as a background for best results. Any color other than white will diminish glow. 

l.If painting a black surface with powders, brilliance will be much less. 

m.Use the clearest vehicle possible. Any color in the vehicle will decrease the brightness and length of glow. 

n.The thicker (to a point) the layer of Glow Powder will produce longer and brighter luminosity. 

o.Try to prevent moisture in the manufacturing process. A yellowing of resin may indicate moisture. Apply a final clear overcoat to protect the material from humidity and to improve gross. 

p.Stronitum based pigments should only be mixed into oil/solvent bases. If your project requires a water based medium, then you need to purchase one of our pigments that are treated for water protection.  

Notice: A glass or Plastic spatula should be used when stirring the powder and printing ink. A metal implement may react with powder

Usage Instructions for Luminous Paints

a.By brush painting, roll painting or spray-painting.  

b.For good luminous effects, the luminous layer should be at least 100~150um. 

c.A base coat of white or very light color is preferred. Applying luminous paint on dark colors reduces the glow effect by as much as 50%.
 

d.Use a layer of varnish over the luminous surface to add a glossy effect to the paint. A layer or two of clear varnish also provides a certain level of surface protection. 

e.Adjust the viscosity to suit your application method and stir well prior to painting.  

f.One kilogram of Luminous Powder can be mixed to product up to 2 litres of glow paint. 

g.One kilogram of UV phosphorus Powder can be mixed to produce up to 5 litres of UV Ink.

h.One litre of glow paint or UV paint can cover an area of about 3.5 square meters.

In coating industry Used in luminous coatings that are used for painting road signs, safety marks and artworks.

Write a Comment
Comment will be posted once reviewed.
Article Category
Contact Us
Contacts : Li Sir
Phone : 13706417022
Fax : 053188580380
Email : huamingweizhu@163.net
QQ : 1344607103
Address : Room 308,44# Wenhua Xi Road Jinan China